In obs I can only select “quad cortex”, no individual busses, which results in the direct input signal always in the recording…so unusable.I downloaded OBS and it works absolutely fine for me. I did have to switch the dry/wet setting around in the IO menu but that was it. Could you explain more about what you are trying to do?
I would hope that he already has somebody under his wing to pass the torch to. That would be a wise business decision.what happens when Cliff retires? I'd like to think he's got prodigies in the works. But then again, look what happened with Marshall when Jim kicked it. Not the best comparison but hopefully that makes sense.
In obs I can only select “quad cortex”, no individual busses, which results in the direct input signal always in the recording…so unusable.
I need the usb outputs to show up in obs…just like it does with other interfaces.
I can select USB outputs. Are you on Windows?
Edit: if on Windows do you have the ASIO driver installed? Second down here.
Did you try in IO settings on the QC to swap the wet and dry signal?
That’s what I do…much faster. You can even get your phones cam in there via wifi…you’d need some software. Can’t remember which one worked…but plenty of freeware when I tried.Been playing around with OBS again this morning. It's really good.
I usually make videos for my jazz lessons and sync sound from my DAW and video from my phone together in DaVinci resolve but now I'm thinking I can record it all together here.
I’m on a Mac, the usb outputs don’t show up.
I’m not aware of specific wet/dry settings…in the global out menu?
You guys think this will power a QC properly?
Summing the 2 outputs + the 12V for the “link” should be 2A.
That 1A 12v output is meant for adding a power extension…not sure if that is with consequense when used to power a unit..
Harley Benton PowerPlant ISO-3AC SAG Modular
Multi-netvoeding voor effectpedalen Meervoudige modulaire netvoeding met SAG-optie voor eenvoudige spanningsverlaging voor fuzz- en distortion-effecten, 4 Geïsoleerde, gefilterde en kortsluitvaste uitgangen elimineren ruis en gebrom, Voldoende...www.thomann.de
Who said? Any explanation why?I asked on Discord. They said they wouldn't try it. Most use this.
🎸 Cioks DC7
Professional Power Supply for Effect Pedals Extremely compact multi-output power supply with switch mode, 7 Isolated DC outputs with 6 W each, Extremely low interference due to multi-stage filtering, Each output with 9 V DC / 660 mA, 4 Selectable...www.thomann.de
Who said? Any explanation why?
Thnx…is that fama “just a dude”…or ndsp support person?
They're all just dudes/dudettes. You might get a super rare comment from someone at NDSP, but that's less than once in a full moon.Thnx…is that fama “just a dude”…or ndsp support person?
Hm…gonna try the crux hooked up to my zuma…that outputs 1.5A at 24V…that should end up 3A at 12V…minus what the Crux looses in conversion.Someone (forget if FB group, Discord or the unity neural forum) mentioned a Strymon Ojai worked great. Just need the Cioks Crux to convert 24V to 12V.
EDIT: more specially the Strymon power supply. If you load up an Ojai with other pedals or too many high current draw ones, the QC won’t have enough current. But on its own it appears to be enough.
CIOKS Crux + 2x Strymon Ojais?
Hi there! So, I just received my CIOKS Crux through the mail, and I plugged it into the 24V thru of the second Strymon Ojai in my power chain and… it power cycles before rebooting. Doesn’t get to the load screen. I’ve switched it to 12v, before any asks, but I wonder why it struggles to boot...unity.neuraldsp.com
Yeah they gave no reason why it wouldnt work lolThey're all just dudes/dudettes. You might get a super rare comment from someone at NDSP, but that's less than once in a full moon.
Gotta have the most expensive shit, man. Don't even bother trying anything less, even if it totally looks like it could work.
Nah. Just sell out and/or license all your tech and then sail off into the sunset. It’s the modern way. Fender AxeFx IV.I would hope that he already has somebody under his wing to pass the torch to. That would be a wise business decision.
Thnx…is that fama “just a dude”…or ndsp support person?